Dji Ronin MX | Blu Strategic Services - Rental
Dji Ronin | Blu Strategic Services - Rental

Dji Ronin | Blu Strategic Services - Rental

Developed for the filmmaking professional, the DJI Ronin marks a generational leap in camera stabilization technology. Its custom sensors, powerful motors and advanced algorithms put world-class precision in your hands. Once your camera is configured, the Ronin can be ready to shoot in as little as 5 minutes, saving time and increasing efficiency on set. The built-in ATS (Auto Tune Stability) technology intelligently tunes Ronin to your camera rig at the touch of a button. Transform tilt and pan movements on the Ronin into smooth and stabilized camera angle changes.
Made from precision machined aircraft-grade aluminum, the Ronin offers the durability to withstand rugged use on set and meets the high demand for reliability. No loose cables or zip ties give it a clean, professional appearance.
With a little practice, the Ronin takes less than 5 minutes to set up and balance whenever the camera configuration is changed. This saves time, making the Ronin more efficient in professional environments where every second counts. The built-in ATS (Auto Tune Stability) technology intelligently tunes the Ronin to your camera rig at the touch of a button.
The Ronin is not customized for any specific camera. It can be easily adjusted to carry everything from small & light M4/3 cameras to heavier systems like the Red Epic.
3 different modes of operation allow the Ronin to be used in different scenarios, all of which can be entered without changing settings on the Ronin Assistant app or a 2nd operator remote.

DJI Gimbals
Ronin | Blu Strategic Services - Rental


Flip the gimbal over to bring the camera closer to eye level for a higher perspective without straining to lift it. Use this mode when sticking the Ronin out of a car’s sunroof or when trying to shoot over a crowd of people.

Ronin | Blu Strategic Services - Rental


The default gimbal operation is the Underslung mode. The camera can be comfortably held low to the ground, at chest level or anywhere in between. This mode is also used when the Ronin is suspended from a camera jib or crane.

Ronin | Blu Strategic Services - Rental


When a slimmer gimbal profile is needed, i.e. when moving through doorways or narrow paths, Briefcase mode is ideal. It allows the gimbal to be held to the side and close to the legs, much like a briefcase.

Motors have been developed with the high performance Ronin in mind. Using FOC control, you can count on high precision, low vibration, and increased torque. Digital Absolute Positioning Encoders in each axis provide the highest levels of accuracy. This combination of custom motor modules and features is found in no other system.

Follow focus systems and matte boxes can be easily mounted on the Ronin using industry standard dual 15mm segmented rods. The segmented rods allow for customization of different lengths, dependent on camera and lens setup.

An included 2nd operator transmitter allows a 2nd operator to pan, tilt, and roll independent of the Ronin’s movement. SmoothTrack speeds and operation modes can be assigned with 2 custom toggle switches on the transmitter.

Underslung Mode
Upright Mode
Briefcase Mode
Built-in independent IMU module
DJI Specialized Gimbal Drive Motors with Encoders
Bluetooth Module
USB Connection
2.4GHz Receiver
Temperature Sensor
DJI Advanced 32-Bit DSP Processor
D-Bus Receiver Supported

Camera Tray Dimensions: Maximum depth at center of mass on camera base plate: 140mm Maximum height measured from top of camera base plate: 225mm Maximum width: 195mm
Accessory Power Connections: 12V regulated P-Tap x 2, USB 500mW x 1, DJI Lightbridge x 1
GCU Input Power: 4S Ronin Battery
Connections: 2.4GHz Remote Control, Bluetooth, USB 2.0
PC Assistant Software Requirements: Windows XP SP3; Windows 7; Windows 8 (32 or 64 bit);Mac OS X 10.9 or above
Mobile Assistant Software Requirements: iOS version 6.1 or above Mobile Device iPhone 4s, iPhone 5, iPhone 5s, iPod touch 5 , iPad 3, iPad 4, iPad mini

Working Current: Static current: 300mA (@16V) Dynamic current: 600mA (@16V) Locked motor current: Max 10A (@16V)
Operating Temperature: 5°F ~ 120°F (-15°C ~ 50°C)
Weight: 4.20kg (9.26lbs) fully loaded with handlebar
Gimbal Dimensions: 620mm(W) x 280-380mm (D)x 500mm(H)

Load Weight (Reference Value): 16lbs (7.25kg)
Angular Vibration Range: ± 0.02°
Maximum Controlled Rotation Speed: Pan axis: 90°/s Tilt axis: 100°/s Roll axis: 30°/s
Controlled Rotation Range: Pan axis control: 360° Tilt axis control: +45° to -120° Roll axis control: ± 25°
Mechanical Endpoint Range: Pan axis: 360° Tilt axis: +110° /-170° Roll axis: ± 110°